Name: TDK Inductors SPM5015T-1R5M-LR
Brand: TDK Corporation
SKU: SPM5015T-1R5M-LR
Availability: InStock

Question 1

How much voltage derating should I apply when selecting a component?

Accepted Answer

Apply at least 50% voltage derating for general reliability. In filter circuits, the voltage rating should be at minimum 1.42× the AC RMS voltage. For DC applications, add 20-50% margin above your maximum operating rail.

Question 2

Is lower ESR always better?

Accepted Answer

Not always. Low ESR improves ripple current handling and reduces self-heating. However, excessively low ESR can destabilize switching regulator feedback loops and cause oscillations. Match the component to the application.

Question 3

Where should I place decoupling components on a PCB?

Accepted Answer

Place as close as possible to the IC power and ground pins. Every millimeter of trace adds parasitic inductance. Use a 0.1µF MLCC in parallel with a 10µF bulk capacitor for wide frequency coverage. Use the shortest via path to power and ground planes.

Question 4

How can I test whether a component is good using a multimeter?

Accepted Answer

For capacitors ≥0.01µF, use R×10k range — needle swings right then returns toward infinity. No movement = open. Stays at zero = short. Under 500kΩ = excessive leakage. For inductors and beads, use the lowest resistance range and verify the DC resistance matches the datasheet.

Question 5

What causes SMD components to crack, and how can I prevent it?

Accepted Answer

Most commonly caused by PCB flexure during depaneling, thermal shock from improper soldering, or physical stress from handling. Cracks start at terminations and propagate inward. Prevent by placing components parallel to board flexure, away from edges and mounting holes, following manufacturer reflow profiles.

Question 6

How do I get a datasheet and RFQ for a specific part number?

Accepted Answer

Click Request a Quote on the product page, fill in your part numbers and target quantities. Our team responds within 24 hours with datasheet links, competitive pricing, and lead time information. Volume discounts available. You can also email info@movthing.com directly.

Question 7

How do I choose the right package size for my design?

Accepted Answer

Larger packages handle higher power and current ratings but are more vulnerable to mechanical cracking. 0201-0402 suit space-constrained mobile. 0603-0805 for general-purpose. 1206-1210 for power applications. Always verify the manufacturer land pattern recommendation.

RoHS	Yes
Manufacturer	TDK Corporation
Package	1000 PCS
Description	TDK Corporation SPM5015T-1R5M-LR — inductors component, 1000 PCS. Contact Movthing for volume pricing and current lead times. Most inquiries answered within 24 hours.

TDK Inductors SPM5015T-1R5M-LR

Specifications

Related Products

Frequently Asked Questions